JVC RX-774RBK manual SOFT2 SOFT1 Flat SHARP1 SHARP2

4.Turn MULTI JOG to adjust the center speaker output level (from –10 dB to +10 dB), while the indication of the previous step is still on the display.

5.Press BALANCE/SURROUND ADJUST repeatedly until “REAR L LEVEL” appears on the display.

The display changes to show the current setting.

6.Turn MULTI JOG to adjust the left rear speaker output level (from –10 dB to +10 dB), while the indication of the previous step is still on the display.

7.Press BALANCE/SURROUND ADJUST repeatedly until “REAR R LEVEL” appears on the display. The display changes to show the current setting.

8.Turn MULTI JOG to adjust the right rear speaker output level (from –10 dB to +10 dB), while the indication of the previous step is still on the display.

9.Press BALANCE/SURROUND ADJUST repeatedly until “CENTER TONE” appears on the display.

The display changes to show the current setting.

10.Turn MULTI JOG to select the center tone level, while the indication of the previous step is still on the display.

The center tone level affects the mid-frequency range, which the human voice is mostly made up of.

As you turn it, the display changes to show the following:

MULTI JOG

BALANCE/SURROUND

ADJUST

MULTI JOG

BALANCE/SURROUND

ADJUST

MULTI JOG

BALANCE/SURROUND

ADJUST

MULTI JOG

English

Note:

You cannot adjust the left rear speaker level when “REAR SPK” is set to “NO” (see page 25).

Note:

You cannot adjust the right rear speaker level when “REAR SPK” is set to “NO” (see page 25).

Note:

The center tone cannot be adjusted when “CENTER SPK” is set to “NONE” (see page 24).

SOFT2 SOFT1 FLAT SHARP1 SHARP2

To make the dialogue clearer, select “SHARP1” (little) or “SHARP2” (much). To make the dialogue softer, select “SOFT1” (little) or “SOFT2” (much). When “FLAT” is selected, no adjustment is applied.

50