JVC RX-774RBK manual Switching to a Broadcast Program of Your Choice Temporarily, News

Switching to a Broadcast Program of Your Choice Temporarily

Another convenient RDS service is called “EON (Enhanced Other Network).” The EON indicator lights up while receiving a station with the EON code.

This allows the receiver to switch temporarily to a broadcast program of your choice (NEWS, TA, and/or INFO) from a different station except in the following cases:

•When you are listening to a non-RDS stations (all AM — MW/LW and some FM stations).

•When the last received FM station is a non-RDS station.

•When the receiver is in standby mode.

English

Note:

FM stations must be preset to use the EON function.

On the front panel only:

1.Press EON so that the last selected program type appears on the display.

The receiver enters EON standby mode*.

2.Press TA/NEWS/INFO until the program type you want appears on the display.

Each time you press the button, the display changes to show the following:

EON

TA/NEWS/INFO

Note:

*When the receiver is in EON standby mode, the receiver is ready to receive the EON data (TA/NEWS/INFO) you select.

	TA			NEWS/INFO		TA/INFO		TA/NEWS
		NEWS			INFO		TA/NEWS/INFO
TA:			Traffic Announcement in your area.
NEWS:			News.
INFO:			Program the purpose of which is to impart advice in the widest sense.

CASE 1 If there is no station broadcasting the program you have selected

The receiver continues playing the current source (all sources except AM (MW/ LW)).

Ô

When a station starts broadcasting the program you have selected, the receiver automatically switches to the station. The indicator of received PTY code starts flashing.

Ô

When the program is over, the receiver goes back to the previously selected source, but still remains in EON standby mode. The indicator of received PTY code stops flashing and remains lit.

Continued to the next page.

34