JVC RX-774RBK Using the DAP Modes, Gives the feeling of a live music club with a low ceiling

Using the DSP Modes

English

Using the DAP Modes

You can use five DAP modes — “Live Club, Dance Club, Hall, Pavilion, and Headphones.”

Among the DAP modes, “Headphones” is very special. It can create the same stereo sound as you listen through the speakers off air while listening to a source using headphones. So, you can feel as if you were not using the headphones and listening to music in a room.

Notes:

• When you select “DVD MULTI”

as the source to play, you

cannot select the DAP modes.

• The DAP mode is not used

with the other DSP modes

such as the Dolby Pro Logic

and 3D-PHONIC mode. When

the DAP mode is turned on,

On the front panel:

1.Press DSP MODE.

The current DSP mode appears on the display.

2.Turn MULTI JOG until the mode (LIVE CLUB, DANCE CLUB, HALL, PAVILION, or HEADPHONE) you want appears on the display, while the indication of the previous step is still on the display.

The DSP indicator also lights up on the display.

As you turn it, the DSP modes change as follows (the indicator of the selected DSP mode also lights up on the display):

DSP MODE

MULTI JOG

the other DSP mode, if used,

will be turned off.

THEATER LIVE CLUB DANCE CLUB HALL

DSP OFF						PAVILION
		3D THEATER		3D DRAMA	3D ACTION	HEADPHONE
	LIVE CLUB:		Gives the feeling of a live music club with a low ceiling.
	DANCE CLUB:		Gives a throbbing bass beat.
	HALL:		Gives clear vocal and the feeling of a concert hall.
	PAVILION:		Gives the spacious feeling of a pavilion with a high ceiling.
	HEADPHONE:		Gives a spacious stereo effect when listening with headphones.
	DSP OFF:		No DSP mode is applied.

For the other modes, see pages 39 and 44.

Note:

When you select “HEADPHONE” (the HEADPHONE indicator lights up), you cannot go to the following steps. No adjustments can be made for “HEADPHONE.”

If you need to make any adjustment, go to the following steps.

3.Press BALANCE/SURROUND ADJUST repeatedly until “REAR LEVEL” appears on the display.

The display changes to show the current setting.

4.Turn MULTI JOG to adjust the rear speaker output level (from –10 dB to +10 dB), while the indication of the previous step is still on the display.

BALANCE/SURROUND

ADJUST

MULTI JOG

Notes:

•You cannot adjust the left and right rear speaker output level separately.

•You cannot adjust the rear speaker level when “REAR SPK” is set to “NO” (see page 25).

41