JVC RX-774RBK manual Center tone cannot be

Using the DSP Modes

English

4.Press BALANCE/SURROUND ADJUST repeatedly until “CENTER TONE” appears on the display.

The display changes to show the current setting.

BALANCE/SURROUND

ADJUST

Note:

The center tone cannot be

5. Turn MULTI JOG to select the center tone level you
want, while the indication of the previous step is still	MULTI JOG
on the display.
As you turn it, the display changes to show the
following:

SOFT2 SOFT1 FLAT SHARP1 SHARP2

If you have selected Theater Surround, go to the following steps.

adjusted when “CENTER SPK” is set to “NONE” (see page 24).

6.Press BALANCE/SURROUND ADJUST repeatedly until “DSP EFFECT” appears on the display.

The display changes to show the current setting.

7.Turn MULTI JOG to select the effect level, while the indication of the previous step is still on the display. As you turn it, the effect level changes as follows:

DSP EFFECT 1 DSP EFFECT 2 DSP EFFECT 3

DSP EFFECT 5 DSP EFFECT 4

As the number increases, the surround effect becomes stronger.

BALANCE/SURROUND

ADJUST

MULTI JOG

Note:

When you have selected Dolby Pro Logic, you cannot select the effect level.

Note:

Once you have adjusted the Surround modes, the adjustment is memorized for each Surround mode.

47