JVC RX-774RBK manual Using the DSP Modes, Using the 3D-PHONIC Modes, Press DSP Mode

Using the DSP Modes

English

IMPORTANT:

AUDIO/TV When using the Remote Control, check to see if its remote control

/VCR

mode selector is set to the correct position:

CATVTo operate this receiver, set it to “AUDIO/TV/VCR (except when

/DBS

selecting the DBS tuner as the source).”

Using the 3D-PHONIC Modes

When using JVC’s 3D-PHONIC modes, you need only two front speakers to reproduce

the soundtracks of video software bearing the mark DOLBY SURROUND .

The 3D-PHONIC modes give you a very realistic surround effect as if the sound is reproduced through the Dolby Pro Logic decoder.

Notes:

• When you select “DVD

MULTI” as the source to play,

you cannot select the 3D-

PHONIC modes.

On the front panel:

1.Press DSP MODE.

The current DSP mode appears on the display.

2.Turn MULTI JOG until the mode (3D ACTION, 3D DRAMA, or 3D THEATER) you want appears on the display, while the indication of the previous step is still on the display.

The 3D-PHONIC, DSP and PRO LOGIC indicators also light up on the display.

As you turn it, the DSP modes change as follows (the indicator of the DSP mode also lights up on the display):

DSP MODE

MULTI JOG

• The 3D-PHONIC mode is not

used with the other DSP

modes such as the Dolby Pro

Logic and the DAP mode.

When the 3D-PHONIC mode

is turned on, the other DSP

mode, if used, will be turned

off.

THEATER LIVE CLUB DANCE CLUB HALL

DSP OFF						PAVILION
		3D THEATER		3D DRAMA	3D ACTION	HEADPHONE
	3D ACTION:		Best for action and war movies — where the action is fast and
			explosive.
	3D DRAMA:		Best for dramas and romantic movies — where the action is
			slow and soft.
	3D THEATER:		Reproduces the sound field of a large theater.
	DSP OFF:		No DSP mode is applied.

For the other modes, see pages 41 and 44.

If you need to make any adjustment, go to the following steps.

3. Press BALANCE/SURROUND ADJUST repeatedly				BALANCE/SURROUND
until “DSP EFFECT” appears on the display.					ADJUST
The display changes to show the current setting.
4. Turn MULTI JOG to select the effect level, while the
indication of the previous step is still on the display.					MULTI JOG
As you turn it, the effect level changes as follows:
DSP EFFECT 1	DSP EFFECT 2		DSP EFFECT 3
DSP EFFECT 5		DSP EFFECT 4

As the number increases, the selected 3D-PHONIC mode becomes stronger.

39