JVC RX-774RBK manual Audio component connections, Connecting Audio/Video Components

Connecting Audio/Video Components

You can connect the following audio/video components to this receiver using cables with RCA pin plugs (not supplied). Refer also to the manuals supplied with your components. If you want to connect a component not listed in the table below, refer to the manual supplied with it.

Audio Components		Video Components
• Turntable	•	DVD (Digital Video Disc) player
• CD player	• TV
• Cassette deck	•	DBS (Direct Broadcasting Satellite) tuner
(or MD recorder)	• VCR

Audio component connections

Use the cables with RCA pin plugs (not supplied).

Connect the white plug to the audio left jack, and the red plug to the audio right jack.

Turntable

To audio output

English

CAUTION:

If you connect a sound- enhancing device such as a graphic equalizer between the source components and this receiver, the sound output through this receiver may be distorted.

If an earth cable is provided for your turntable, connect the cable to the screw marked GND on the rear panel.

Notes:

• Any turntables incorporating a

small-output cartridge such as

an MC (moving-coil type) must

CD player	RIGHT	LEFT AUDIO
	GND	PHONO
	To audio output
		CD
		OUT
	To audio input	(REC)
		TAPE
		/MD
	To audio output	IN
		(PLAY)
Cassette deck		CENTER
	SUB
or		DVD
	WOOFER

MD recorder

To audio output

RIGHT LEF

be connected to this receiver

through a commercial head

amplifier or step-up

transformer. Direct connection

may result in insufficient

volume.

• You can connect either a

cassette deck or an MD

recorder to the TAPE/MD

jacks. When connecting an

MD recorder to the TAPE/MD

jacks, change the source

name, which will be shown on

the display when selected as

SUBWOOFER

the source, to “MD.” See page

To audio input

OUT

23 for details.

If your audio components have a COMPU LINK-3 or TEXT COMPU LINK terminal

•See also page 59 for detailed information about the connection and the COMPU LINK-3 remote control system.

•See also page 60 for detailed information about the connection and the TEXT COMPU LINK remote control system.

14