Menu items in the range 600 to 699, relating to the time code generator (Continued)
Item number | Item name |
|
| Settings | ||||||
|
|
|
|
|
|
|
|
|
|
|
620 | TC CONVERT 24F t |
|
| Select whether to convert playback time code to 25F time code during playback | ||||||
| 25F (in 50i or 25PsF mode |
|
| of tape recorded in 24PsF or 23.98PsF mode. | ||||||
| only) |
|
| OFF |
| : Do not convert time code. | ||||
|
|
|
| ON: Convert time code. | ||||||
| TC CONVERT 25F t |
|
| Select whether to convert playback time code to 24F time code during playback | ||||||
| 24F (in 24PsF or |
|
| of tape recorded in 50i or 25PsF mode. | ||||||
| 23.98PsF mode only) |
|
|
|
|
|
|
| : Do not convert time code. | |
|
| OFF |
| |||||||
|
|
|
| ON: Convert time code. | ||||||
621 | 24F STARTING TC SEL |
|
| Select one of the following setting for time code conversion from 24F to 25F. | ||||||
| (in 50i or 25PsF mode |
|
|
|
|
|
|
| : Do not set the starting TC | |
|
| OFF |
| |||||||
| only) |
|
| ON: Set the starting TC | ||||||
|
|
|
| To set the 24F starting TC | ||||||
|
|
|
| Press the F5 (SET) button with this menu item displayed in the menu display, to | ||||||
|
|
|
| enter the starting TC setting mode. You can then set the user starting TC digit by | ||||||
|
|
|
| digit using the F1 (PREV) button and F2 (NEXT) buttons for digit selection. When | ||||||
|
|
|
| all required digits have been set correctly, press the F5 (SET) button again to | ||||||
|
|
|
| save the starting TC and exit from the ID code setting mode. | ||||||
|
|
|
|
|
|
|
|
|
| |
| 25F STARTING TC SEL |
|
| Select one of the following setting for time code conversion from 25F to 24F. | ||||||
| (in 24PsF or 23.98PsF |
|
| OFF |
| : Do not set the starting TC | ||||
| mode only) |
|
| ON: Set the starting TC | ||||||
|
|
|
| To set the 25F starting TC | ||||||
|
|
|
| Press the F5 (SET) button with this menu item displayed in the menu display, to | ||||||
|
|
|
| enter the starting TC setting mode. You can then set the user starting TC digit by | ||||||
|
|
|
| digit using the F1 (PREV) button and F2 (NEXT) buttons for digit selection. When | ||||||
|
|
|
| all required digits have been set correctly, press the F5 (SET) button again to | ||||||
|
|
|
| save the starting TC and exit from the ID code setting mode. | ||||||
|
|
|
|
|
|
|
|
|
| |
622 | 24F JUMPING TC SEL (in |
|
|
| Select one of the following setting for time code conversion from 24F to 25F. | |||||
| 50i or 25PsF mode only) |
|
|
|
|
| : Set JUMPING TC to “STARTING TC | |||
|
|
|
|
| ||||||
|
|
|
|
| : Set JUMPING TC to “(STARTING TC | |||||
|
|
|
|
| ||||||
|
|
|
|
| +1H : Set JUMPING TC to “(STARTING TC +1H”. | |||||
|
|
|
|
| +2H : Set JUMPING TC to “(STARTING TC +2H”. | |||||
|
|
|
|
| +3H : Set JUMPING TC to “(STARTING TC +3H”. | |||||
|
|
|
|
| 0H : Set JUMPING TC to STARTING TC”. | |||||
|
|
|
|
|
|
|
| |||
| 25F JUMPING TC SEL (in |
|
|
| Select one of the following setting for time code conversion from 25F to 24F. | |||||
| 24PsF+A23.98PsF mode |
|
|
|
|
| : Set JUMPING TC to “STARTING TC | |||
|
|
|
|
| ||||||
| only) |
|
|
| : Set JUMPING TC to “(STARTING TC | |||||
|
|
|
|
| ||||||
|
|
|
|
| +1H : Set JUMPING TC to “(STARTING TC +1H”. | |||||
|
|
|
|
| +2H : Set JUMPING TC to “(STARTING TC +2H”. | |||||
|
|
|
|
| +3H : Set JUMPING TC to “(STARTING TC +3H”. | |||||
|
|
|
|
| 0H : Set JUMPING TC to STARTING TC”. | |||||
651 | UMID OUTPUT |
|
| Select UMID output and the UMID type. | ||||||
|
|
|
|
|
| : Do not output UMID. | ||||
|
|
|
|
| off | |||||
|
|
|
|
| BASIC: Output Basic UMID. | |||||
|
|
|
| EXTENDED: Output Extended UMID. | ||||||
|
|
|
|
|
|
| ||||
|
|
|
|
| Note |
| ||||
|
|
|
| Evin if EXTENDED is selected, Basic UMID is output if Basic UMID is recorded | ||||||
|
|
|
| on the tape being played back. | ||||||
|
|
|
|
|
|
|
|
|
|
|
Chapter10 SetupMenus
Chapter 10 Setup Menus