Menu items in the range 800 to 899, relating to audio control

Item number

Item name

Settings

 

 

 

 

 

 

 

 

 

 

801

DIGITAL JOG SOUND

Turns the digital jog sound on and off.

 

 

OFF: Digital jog sound is turned off.

 

 

Audio of digital channels not subjected to speed correction is output. When the

 

 

tape stops, after one second the audio is muted.

 

 

ON

: Digital jog sound is turned on.

 

 

When the tape speed is in the range ⋅–1 to ⋅1 (for Betacam SX playback, in the

 

 

range ⋅–1 to ⋅2), speed correction is carried out, and the same jog sound as a

 

 

conventional analog VTR is output.

 

 

 

802

DIGITAL AUDIO MUTE IN

Set the digital audio muting conditions during shuttle playback.

 

SHUTTLE MODE

OFF

: Not muted.

 

 

CUEUP: Muted during cue-up or preroll operations.

 

 

FULL: Muted in shuttle mode.

803

DIGITAL AUDIO FADE

Specify the time for cross-fade or fade in/out editing of audio signals.

 

TIME

5 ms,

 

, 15 ms, 20 ms, 25 msa), 50 msb), 85 ms, 115 msc)

 

10 ms

 

 

 

 

 

 

 

 

 

 

 

 

Note

 

 

 

 

The cross-fade or fade in/out operation means that the recording is rewritten from

 

 

the OUT point for the length specified by this setting. Even at the minimum 5 ms

 

 

setting, a length of recording corresponding to a field is rewritten.

 

 

To avoid rewriting, set menu item 317 AUDIO EDIT MODE to CUT. In this case

 

 

there is an audio discontinuity at the edit point. There is no effect on the recorded

 

 

video signal.

805

AUDIO MONITOR

Select the audio mixing method used for digital audio signals and Betacam

 

OUTPUT MIXING

playback analog audio signals supplied to the MONITOR OUTPUT connector.

 

 

ADD: Simple addition

 

 

RMS

: Root-mean-square

 

 

AVE:

 

Simple average

 

 

 

 

 

 

 

806

LEVEL METER SCALE

Select the mode in which digital audio levels are displayed.

 

 

PEAK 0

: Displays the audio level as negative values with the maximum level set

 

 

to 0 dB.

 

 

REF.0: Displays the audio level as positive and negative values with the

 

 

reference level set to 0 dB.

 

 

 

 

 

 

 

 

 

 

a) Cross-fade time is 24 ms.

 

 

 

 

 

 

 

(Continued)

 

 

 

 

 

 

 

 

b)Actual value is 49 ms.

c)Actual value is 114 ms.

10 Chapter

Menus Setup

Chapter 10 Setup Menus 10-27