Parts of Functions and Names 2 Chapter

eFormat area

59.94i SDI ASMBL CONFI ON RECORDER

E RECORDER/

PLAYER display

D CONFI display

CASMBL display

BSDI input display

ASystem frequency

ASystem frequency

Displays the system frequency for recording selected with setup menu item 013.

For details on setup menu item 013, see page 64.

BSDI input display

Lights when VIDEO IN on the P2 VIDEO page of the function menu is set to SDI and an SDI signal is being input. If an SDI signal is not input, it flashes.

CASMBL display

Lights when ASSEMBLE on the HOME page of the function menu is set to ON.

DCONFI display

Lights when CONFI on the HOME page of the function menu is set to ENABLE. During confidential playback, CONFI ON is lit.

ERECORDER/PLAYER display

Lights according to the settings of R/P on the P5 EDIT page of the function menu. PARA RUN appears in PARA RUN operations, and two VTRs are controlled simultaneously.

If setup menu item 214 is set to SDI and the REMOTE button is lit, SDI RMT appears. It flashes if an HD-SDI signal is not input, and is continuously displayed if a VTR control signal of the HD-SDI signal is recognized.

During sequential recording, SEQ RC appears.

For details on the settings of the function menu, see “3-7 Basic Operations of the Function Menu” on page 31.

For details on the setting for PARA RUN, see setup menu item 201 on page 67.

For details on setup menu item 214, see page 68.

fTimecode setup area

LTC DF VITC LTC EXT-LTC R-RUN REM:00M

G Remaining tape length

F REC RUN/FREE

RUN indication

E Timecode generation mode

DReference timecode

CTimecode type

BDrop frame display

ATime data type

ATime data type

Displays the type of time data displayed in the time data display area.

BDrop frame display

DF appears when a tape recorded in drop frame mode is played.

CTimecode type

When VITC is read during playback, VITC is displayed. When LTC is read, LTC is displayed. During recording, the type of timecode being recorded appears. In E-E mode, if the timecode to be recorded can be read, it is displayed.

DReference timecode

Displays the setting for TCG on the P4 TC page of the function menu (INT, EXT or SDI).

ETimecode generation mode

Displays the setting for PRST/RGN on the P4 TC page of the function menu (PRESET, LTC, or VITC).

FREC RUN/FREE RUN indication

Displays the setting for RUN on the P4 TC page of the function menu (FREE or REC).

GRemaining tape length

Displays the amount of tape remaining in meters.

For details on the settings of the function menu, see “3-7 Basic Operations of the Function Menu” on page 31.

gTime data display area

Displays the time data. During setup menu operations, time data appears in the upper half, and the menu item appears in the lower half.

18 Front Panel