Menus Setup 9 Chapter
Switching the system frequency (menu item 013)
To switch the system frequency, proceed as follows.
Note
•Before carrying out this operation, consult the person responsible for system installation.
•When the unit is used in 50i mode, only an analog tape can be played back in the simple playback mode.
1
2 Turn the MULTI CONTROL knob to display setup menu item 013.
3 Press the SELECT function button to select the displayed setup menu item 013.
4 Turn the MULTI CONTROL knob or press the – or + function button to display PUSH SET.
5
6 Turn the MULTI CONTROL knob or press the – or + function button to select the system frequency.
7 Press the SET function button.
TURN OFF/ON POWER!! appears.
8 Turn the power OFF.
When the power is turned next, the unit operates in the selected mode.
This unit allows menu settings to be saved in menu banks. Saved sets of menu settings can be recalled for use as required. The current active setup menu settings as well as settings saved in menu banks are stored in separate storage areas for 50i and 59.94i modes.
Saving the current active menu settings
Set menu items B11 SAVE SETUP BANK 1 or B12 SAVE SETUP BANK 2 to ON, depending on which of the menu banks you wish to save in, then press the SET function button.
Recalling settings from a menu bank
When recalling the settings saved in menu banks 1 or 2, set the corresponding menu items B01 RECALL SETUP
BANK 1 or B02 RECALL SETUP BANK 2 to ON, then press the SET function button.
|
| Recall (B01) |
| |||
Current active |
|
|
|
|
| Menu bank 1 |
|
|
|
| |||
menu settings |
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
| ||
|
| Save (B11) |
| |||
Recall (B02) | Menu bank 2 |
Save (B12)
62 Setup Menu Operations