S+XXXXXXXm Y+D: Altitude data indicating the distance from sea level is displayed in this format. The meaning of the characters and strings shown is as follows.
S (1st character): Indicates data from a Sensor. R is shown for position data from the recording device (Recorder), and T is shown for Target position data.
+(2nd character): Indicates higher than sea level. − indicates lower than sea level.
XXXXXXXm: Altitude data (in unit of meters).
Y: The number of satellites used to calculate position data (hexadecimal)
D: DOP (Dilution of Precision) value
+(between Y and D): Displayed when a support apparatus was used. A space (blank) is displayed when no support apparatus was used.
fLONGITUDE
Following W to indicate west longitude or E to indicate east longitude, the longitude is displayed in degrees, minutes, and seconds (seconds are shown in up to 2 decimal places).
Example: E134 59’23”00 for East longitude 134 degrees 59 minutes 23 seconds 00
gLATITUDE
Following N to indicate north latitude or S to indicate south latitude, the latitude is displayed in degrees, minutes, and seconds (seconds are shown in up to 2 decimal places).
Example: N34 59’23”32 for North latitude of 34 degrees 59 minutes 23 seconds 32
hORGANIZATION Organization code
i USER/COUNTRY
User code and country code
Functions UMID 8 Chapter
UMID Output and Display 59