from global UTC standard time allows correct UMIDs to be generated.
To set the time zone, display the HOME page of the function menu and proceed as follows:
1 Press the MENU button together with the SHIFT button.
The error logger display appears.
ERROR
DATE
TC
DETAIL
SETTING
EXIT 00:26:23:09
ERR LOG
For details on the error logger, refer to the
Maintenance Manual Volume 1.
2 Press the SETTING function button
PREVIOUS
NEXT
OFF
ON
EXIT | 00:26:23:09 |
| |
| TAPE ERROR |
ERR LOG |
3 Press the PREVIOUS or NEXT function button to display OFFSET TO UTC in the time data display area.
PREVIOUS
NEXT
SET |
|
|
|
|
|
EXIT | 00:26:23:09 |
|
|
| |
| OFFSET TO UTC | 00:00 |
ERR LOG |
On the monitor screen, the ERROR LOGGER display appears, and * mark appears before OFFSET TO UTC.
| ERROR LOGGER | |
| (014/023) | |
014 | REFERENCE MISSING | |
015 | A PB DATA | ERROR |
016 | V PB DATA | ERROR |
TAPE ERROR | ON |
WARNING | ON |
CONDITION | ON |
*OFFSET TO UTC | +09:00 |
Push SET button | |
2001 12 24 | 23:59:59 |
4 Turn the MULTI CONTROL knob or press the − or + function button to set the offset from UTC time.
For example, if the local time is 9 hours in advance of UTC, set +09:00.
5 Press the SET function button.
The setting is registered.
Functions UMID 8 Chapter
Recording UMIDs 57