Menus Setup 9 Chapter
Item | Item name | Settings | |
number |
|
|
|
710 | INTERNAL VIDEO SIGNAL | Select the test signal to be generated by the internal test signal generator. | |
| GENERATOR | OFF: No test signal is generated. (The VTR operates normally.) | |
|
|
| [CB75]: Color bar signal |
|
|
| MLTBS: |
|
|
| 10STEP: |
|
|
| PLSBR: Pulse and bar signal |
|
|
| RAMP: Ramp signal |
|
|
| BLACK: Black signal |
|
|
| MCB: Multi color bar signal |
|
|
| To generate the test signal, set this item other than OFF, and press the VIDEO IN |
|
|
| function button for more than three seconds on the P2 VIDEO page of the function |
|
|
| menu. VIDEO IN is set to SG, and a test signal is generated. Pressing the VIDEO IN |
|
|
| function button again stops the generation of a test signal. |
|
|
| |
713 | VIDEO SETUP | Set the video setup amount to be removed from the Betacam playback signal and to be | |
| REFERENCE LEVEL (in | added to the composite output signal. | |
| 59.94i/29.97PsF mode |
| |
| only) |
| |
|
|
| |
|
| ||
|
|
|
|
| 0 | MASTER LEVEL | When BETACAM PB LEVEL and OUTPUT LEVEL is set to MASTER, the setup |
|
|
| amount selected with this item is removed from the Betacam playback signal and |
|
|
| added the same amount to the output signal. |
|
|
| [0.0%], 7.5% |
|
|
|
|
| 1 | BETACAM PB LEVEL | [MASTER]: Set the Betacam playback signal to master. |
|
|
| 0.0%, 7.5%: Set the setup amount to be removed from the Betacam playback signal. |
|
|
|
|
| 2 | OUTPUT LEVEL | [MASTER]: Set the output signal to master. |
|
|
| 0.0%, 7.5%: Set the setup amount to be added to the output signal. |
|
|
|
|
715a) | VIDEO GAIN CONTROL | Adjust the video output level of an SD output signal. | |
|
|
| 0 to [800H] to B50H |
|
|
| |
716a) | CHROMA GAIN CONTROL | Adjust the chroma output level of an SD output signal. | |
|
|
| 0 to [800H] to B50H |
|
|
| |
717a) | CHROMA PHASE | Adjust the chroma phase of an SD output signal. | |
| CONTROL | 0 to [80H] to FFH | |
718a) | SETUP LEVEL | Adjust the SD setup level (black level) of an SD output signal. | |
|
|
| 0 to [110H] to 220H |
|
|
| |
719a) | SYSTEM PHASE SYNC | Adjust the sync phase of an SD output signal. | |
|
|
| 0 to [80H] to FFH |
|
|
| |
720a) | SYSTEM PHASE SC | Adjust the subcarrier phase of an SD output signal. | |
|
|
| [0] to 3FFH |
721a) | Y/C DELAY | For playback of an analog Betacam cassette, adjust the Y/C delay. | |
|
|
| 0 to [800H] to FFFH |
|
|
| |
726a) | H BLANKING WIDTH | Select the horizontal blanking width of the video output signal. | |
|
|
| [NARROW]: Digital blanking (narrow) |
|
|
| WIDE: Analog blanking (wide) |
|
|
| When WIDE is selected, the horizontal blanking width complies with RS170A, and |
|
|
| normally the blanking is widened and the image becomes narrower. It is recommended |
|
|
| to select NARROW at the editing stage, then later, for broadcast transmission to select |
|
|
| WIDE, to output a signal conforming to the standard. |
|
|
| |
727 | VIDEO EDIT PREVIEW | Set the output phase for the video playback signal when ASSEMBLE on the HOME | |
| SWITCHER | page of the function menu is set to ON. | |
|
|
| [INT]: The output phase of the video playback signal is the same as the output phase in |
|
|
| |
|
|
| while watching the VTR output signal. |
|
|
| EXT: The output phase of the video playback signal is the same as the phase of an |
|
|
| input video signal or external reference signal. |
|
|
| |
728 | OUTPUT SCH PHASE | Adjust the subcarrier H phase. | |
|
|
| 0 to [800H] to FFFH |
|
|
|
|
74 Items in the Extended Setup Menu