3-1-2 Using the Battery Pack

Attaching and removing of the BP-GL65/GL95 Battery Pack is described below.

The BP-L60(A)/L90(A), BP-L60S/L80S, and BP-M50/ M100 can also be attached and removed in the same way.

Attaching a battery pack

Attach the BKP-L551 Battery Adaptor to the side panel of this unit and attach the battery pack in it.

For details on attaching the BKP-L551, refer to the installation manual for the BKP-L551.

1 Remove the two screws on the side panel.

Screws

BP-GL65/GL95

4 Slide the BP-GL65/GL95 as shown below so that the connectors on the BP-GL65/GL95 and the BKP-L551

are connected. Chapter3

Preparations

2 Attach the BKP-L551 to the side panel.

BKP-L551

3 Align the grooves on the BP-GL65/GL95 with the projections on the BKP-L551.

5 Connect the DC cable of the BKP-L551 to the DC IN 12V connector.

Removing the battery pack

With the lever pushed in, slide the BP-GL65/GL95 out as shown below.

Lever

Preparing Power Sources

23