Preparations 3 Chapter
HOME page
Item | Setting |
CHARACTR | Specifies whether or not to superimpose |
| timecodes, menu settings, error |
| messages, and so on over the video |
| signals output to the HD SDI OUTPUT |
| (SUPER) connectors, SDI OUT 2 |
| (SUPER) connector, and COMPOSITE |
| OUT 2 (SUPER) connector. |
| ON: Superimpose. |
| OFF: Do not superimpose. |
|
|
PB/EE | Selects the video and audio signals |
| output during fast forward, rewind, stop, |
| and standby. |
| PB: Playback signals |
| EE: |
|
|
CONFI | Selects whether or not to use the |
| confidential playback function when |
| recording. |
| ENABLE: Use the confidential playback |
| function. |
| DISABLE: Do not use the confidential |
| playback function. |
|
|
CTL/TC | Selects the time data to display in time |
| data display area. |
| TC:Playback timecode read by the internal |
| timecode reader or recording timecode. |
| The LTC or VITC time data type |
| indicator is lit. a) |
| UB:User bits data of playback timecodes or |
| recording timecode. The LUB or VIUB |
| time data type indicator lights, |
| depending on whether the timecode is |
| LTC or VITC.a) |
| CTL:The running time of the tape being |
| played back or recorded, as calculated |
| from a count of CTL signals recorded |
| on the tape. The time is displayed in |
| Hours:Minutes:Seconds:Frames |
| format. |
|
|
ASSEMBLE | Sets assemble edit mode. |
| ON: The assemble edit mode is set, and |
| ASMBL appears in the display |
| window. |
| OFF: The assemble edit mode is |
| canceled. |
|
|
TCG SET | When CTL/TC is set to TC, a screen for |
| setting the initial value of the timecode |
| generated by the internal timecode |
| generator appears.b) |
| When CTL/TC is set to UB, a screen for |
| setting the user bit of the timecode |
| appears.b) |
Item | Setting | |
| Submenu |
|
|
|
|
| T/t | Selects the digit to set data. |
|
|
|
| Sets the value. | |
|
|
|
| SET | Stores the set timecode. |
|
|
|
| EXIT | Terminates the operation, abandoning |
|
| any settings not registered. |
|
|
|
a)The selection of LTC and VITC depends on the setting for TCR on the P4 TC page.
b)Not displayed when TCG is not set to INT and PRST/RGN is not set to PRESET on the P4 TC page.
P1 PROCS page
Item |
| Setting | |
VID.PROC |
| Selects the control method for the internal | |
|
| digital video processor. | |
|
| LOCAL: Change the settings of the internal | |
|
| digital video processor by using the | |
|
| function menu. | |
|
| MENU: Change the settings of the internal | |
|
| digital video processor, using the setup | |
|
| menu. | |
|
|
|
|
|
| Note | |
|
| When | controlling the unit with the |
|
| set to MENU. | |
|
|
| |
VIDEO |
| Sets the HD/SD video signal output level (−∞ | |
|
| to +3 dB). | |
|
| PRESET: Regardless of manually set values, | |
|
| the video signal is set to the standard | |
|
| level. | |
|
| Manual setting: With the displayed setting | |
|
| flashing, you can adjust the video signal | |
|
| output level by rotating the MULTI | |
|
| CONTROL knob. | |
|
|
| |
CHROMA |
| Sets the HD/SD chroma signal output level | |
|
| (−∞ to +3 dB). | |
|
| PRESET: Regardless of manually set values, | |
|
| the chroma signal is set to the standard | |
|
| level. | |
|
| Manual setting: With the displayed setting | |
|
| flashing, you can adjust the chroma signal | |
|
| output level by rotating the MULTI | |
|
| CONTROL knob. | |
|
|
| |
HUE/ |
| Sets the color phase of the HD/SD output | |
CHRM PHS |
| signal. | |
|
| PRESET: Regardless of manually set values, | |
|
| the color phase is set to the standard | |
|
| value. | |
|
| Manual setting: With the displayed setting | |
|
| flashing, you can adjust the value across | |
|
| the range ±30° by rotating the MULTI | |
|
| CONTROL knob. | |
|
|
|
|
32 Basic Operations of the Function Menu