Menus Setup 9 Chapter
Item | Item name |
| Settings | ||
number |
|
|
|
|
|
009 a) | CHARACTER TYPE |
| Determines the type of characters such as timecode output from the COMPOSITE OUT | ||
|
|
| 2 (SUPER) connector, HD SDI OUTPUT (SUPER) connector, and SDI OUT 2 (SUPER) | ||
|
|
| connector for superimposed display on the monitor. | ||
|
|
| [WHITE]: White letters on a black background | ||
|
|
| BLACK: Black letters on a white background | ||
|
|
| W/OUT: White letters with black outline | ||
|
|
| B/OUT: Black letters with white outline | ||
|
|
|
| ||
011 a) | CHARACTER |
| Determines the vertical size of characters such as timecode output from COMPOSITE | ||
|
|
| OUT 2 (SUPER) connector, HD SDI OUTPUT (SUPER) connectors, and SDI OUT 2 | ||
|
|
| (SUPER) connector for superimposed display on the monitor. | ||
|
|
| [⋅1]: Standard size | ||
|
|
| ⋅2: 2 times standard size | ||
|
|
|
| ||
012 | CONDITION DISPLAY ON |
| Determines whether the channel condition is superimposed on the superimposed | ||
| VIDEO MONITOR |
| characters. | ||
|
|
| [DIS]: Not displayed | ||
|
|
| ENA: Displayed | ||
|
|
| To display | ||
|
|
| The channel condition is displayed below the timer or status display. | ||
|
|
| Example) | ||
|
|
| A character following V indicates the status of the video channel on the rotary head. | ||
|
|
| A character following A indicates the status of the audio channel on the rotary head. | ||
|
|
| Character pattern | ||
|
|
| |||
|
|
| *: Not good | ||
|
|
| x: Bad | ||
|
|
|
| ||
013 | SYSTEM FREQUENCY |
| Specify whether to enable switching of the system frequency between 59.94i, 50i, | ||
| SELECT |
| 29.97PsF, 25PsF, 24PsF, and 23.98PsF. | ||
|
|
| [OFF]: Disable switching. | ||
|
|
| ON: Enable switching. | ||
|
|
| When ON is selected, the menu display changes to allow switching of the setting | ||
|
|
| between 59.94i, 50i, 29.97PsF, 25PsF, 24PsF, and 23.98PsF. | ||
|
|
| For the procedure for switching the system frequency, see “ Switching the system | ||
|
|
| |||
|
|
|
| ||
|
|
| Notes |
| |
|
|
| • | For the basic and extended setup menus, separate settings are saved for 59.94i, | |
|
|
|
| 29.97PsF mode, 50i, 25PsF mode, and 24PsF, 23.98PsF mode. When you switch | |
|
|
|
| systems, all menu items change to the settings established in the new system. (The | |
|
|
|
| settings are different from those for the mode before switching.) | |
|
|
| • | When the unit is used in 50i, 29.97PsF mode, analog tape can only be played back in | |
|
|
|
| the simple playback mode. | |
|
|
|
| ||
014 | SEQUENTIAL RECORD |
| Selects the method for sequential recording using two | ||
| MODE |
| [OFF]: No sequential recording | ||
|
|
| REPL: For one time sequential recording. Every time a sequential recording ends, | ||
|
|
|
| replace a cassette. | |
|
|
| OVER: For repeated sequential recording by overwriting. (No cassette replacement) | ||
|
|
|
| ||
028 | HD CHARACTER |
| Sets whether character information is superimposed or not to the video signal output | ||
|
|
| from the HD SDI OUTPUT (SUPER) connectors. | ||
|
|
| [OFF]: Not superimposed | ||
|
|
| |||
|
|
| |||
029 | STORED OWNERSHIP | Select whether or not to set the Stored Ownership UMID item. | |||
|
|
| [OFF]: Do not set. | ||
|
|
| ON: Set. | ||
|
|
| To set Stored Ownership, see “ Setting Stored Ownership” on page 56. | ||
|
|
|
| ||
033 | BATTERY END VOLTAGE |
| Sets the voltage to shut down the unit in the battery operation. The battery near end | ||
|
|
| indicator flashes at +0.7 V of the set voltage. | ||
|
|
| [10.5V]~13.5V: 10.5 V to 13.5 V in 0.5 V unit. | ||
|
|
|
| ||
B01 | RECALL SETUP BANK 1 |
| Set to ON to recall menu settings from menu bank 1. | ||
|
|
|
| ||
B02 | RECALL SETUP BANK 2 |
| Set to ON to recall menu settings from menu bank 2. | ||
|
|
|
| ||
B11 | SAVE SETUP BANK 1 |
| Set to ON to save current active menu settings to menu bank 1. | ||
|
|
|
|
|
|
64 Items in the Basic Setup Menu