Menus Setup 9 Chapter

 

 

Items 600 to 699: Settings for a timecode generator

 

 

 

 

 

 

Item

Item name

 

 

Settings

number

 

 

 

 

 

601a)

VITC POSITION SEL-1

 

 

In 59.94i/29.97PsF mode

 

 

 

 

Select a line to insert the VITC in. (For SD output)

 

 

 

 

12H to [16H] to 20H: Select any line from 12 to 20.

 

 

 

 

 

 

 

 

 

Note

 

 

 

 

 

You can insert the VITC signal in two places. To insert it in two places, set both items

 

 

 

 

601 and 602.

 

 

 

 

 

 

 

 

 

In 50i/25PsF mode

 

 

 

 

Select a line to insert the VITC in. (For SD output)

 

 

 

 

9H to [19H] to 22H: Select any line from 9 to 22.

 

 

 

 

 

 

 

 

 

Note

 

 

 

 

 

You can insert the VITC signal in two places. To insert it in two places, set both items

 

 

 

 

601 and 602.

 

 

 

 

 

602a)

VITC POSITION SEL-2

 

 

In 59.94i/29.97PsF mode

 

 

 

 

Select a line to insert the VITC in. (For SD output)

 

 

 

 

12H to [18H] to 20H: Select any line from 12 to 20.

 

 

 

 

 

 

 

 

 

 

Note

 

 

 

 

You can insert the VITC signal in two places. To insert it in two places, set both items

 

 

 

 

601 and 602.

 

 

 

 

 

 

 

 

 

In 50i/25PsF mode

 

 

 

 

Select a line to insert the VITC in. (For SD output)

 

 

 

 

9H to [21H] to 22H: Select any line from 9 to 22.

 

 

 

 

 

 

 

 

 

Note

 

 

 

 

 

You can insert the VITC signal in two places. To insert it in two places, set both items

 

 

 

 

601 and 602.

 

 

 

 

 

603

ID CODE PRESET

 

 

Select whether or not to set the ID code.

 

 

 

 

[OFF]: Do not set the ID code.

 

 

 

 

ON: Set the ID code.

 

 

 

 

To set the ID code:

 

 

 

 

Display this item in the display window, and press the SET function button. The ID code

 

 

 

 

setting mode is obtained. Select the digit to be set by pressing the T or t function

 

 

 

 

button. When you select all digits, set the SET function button again. The ID code is

 

 

 

 

stored and the ID code setting mode is terminated.

 

 

 

 

 

604

ID CODE SW

 

 

Select whether or not to record the ID code set using item 603 in the user bits.

 

 

 

 

[OFF]: Record the normal data in the user bits.

 

 

 

 

ON: Record the ID code in the user bits.

 

 

 

 

 

605

TCG REGEN MODE

 

 

Select the signal to be regenerated when the timecode generator is in the regeneration

 

 

 

 

mode (when the PRST/RGN on the P4 TC page of the function menu is set to LTC or

 

 

 

 

VITC).

 

 

 

 

[TC&UB]: Both the timecode and user bits are regenerated.

 

 

 

 

TC: Only the timecode is regenerated.

 

 

 

 

UB: Only the user bits are regenerated.

 

 

 

 

 

606

TC OUTPUT SIGNAL IN

 

 

Select the signal output from the TIME CODE OUT connector during normal (x1) speed

 

REGEN MODE

 

 

playback.

 

 

 

 

[TAPE]: During tape playback, the playback timecode signal is output without

 

 

 

 

regeneration.

 

 

 

 

REGEN: The playback timecode is output after regeneration.

 

 

 

 

 

607

U-BIT BINARY GROUP

 

 

Select the user bits to be used in the timecode generated by the timecode generator.

 

FLAG

 

 

[000]: Character set not specified

 

 

 

 

001: 8-bit characters compliant with ISO 646 and ISO 2022

 

 

 

 

010: Undefined

 

 

 

 

011: Undefined

 

 

 

 

100: Undefined

 

 

 

 

101: SMPTE 262M page/line multiplex system

 

 

 

 

110: Undefined

 

 

 

 

111: Undefined

 

 

 

 

 

 

70 Items in the Extended Setup Menu