Step 8: Installing the supplied microphone and hood with lens cover

Installing the suppliedmicrophone

Install the supplied XLR adaptor and microphone. You can receive the desired audio quality.

1Attach the XLR adaptor to the accessory shoe on the camcorder and tighten the screw of the XLR adaptor.

2Connect the plug of the XLR adaptor to the Active Interface Shoe of the camcorder.

3Attach the wind screen to the microphone .

4Loosen the microphone holder screw and open the cover.

5Place the microphone into the holder with the model name (ECM-NV1) facing upward, close the cover, and tighten the screw.

6Connect the plug of the microphone to the INPUT1 connector .

7Set the INPUT LEVEL selector to MIC or MIC ATT.

When the selector is set to MIC ATT, you can reduce the volume by about 20dB.

Set the +48V switch to ON.

Started Getting

Continued 19