Searching for the starting point
Make sure that the
Searching for the last scene of the most recent recording (END SEARCH)
END SEARCH will not work once you eject the cassette after you have recorded on the tape.
Touch 
.
60min | 1 | 00:00:00:00 |
END SEARCH
EXECUTING
|
|
|
|
|
| Touch here |
|
| CANCEL |
|
| ||
|
|
|
|
| to cancel the | |
|
|
|
|
|
| |
|
|
|
|
| ||
|
|
|
|
|
| operation. |
|
|
|
|
|
The last scene of the most recent recording is played back for about 5 seconds, and the camcorder enters the standby mode at the point where the last recording has finished.
•END SEARCH will not work correctly when there is a blank section between recorded sections on the tape.
•You can also select [END SEARCH] from the menu. When the PLAY/EDIT lamp lights up, select the [END SEARCH] short- cut in Personal Menu (p. 38).
Reviewing the most recently recorded scenes (Rec review)
You can view about 2 seconds of the scene recorded just before you stopped the tape.
Touch 
.
60min | STBY 00:00:00:00 |
The last 2 seconds (approx.) of the most recently recorded scene are played back. Then, your camcorder is set to the standby.
Recording/Playback
31