•Format the “Memory Stick Duo” on your camcorder or insert another “Memory Stick Duo.” (p. 51)

•You cannot record movies with this unit on the “Memory Stick Duo.”

•When the POWER switch is set to CAMERA-TAPE, you cannot record still images on the “Memory Stick Duo” with:

–[PICT. EFFECT]

–[D. EFFECT]

–[COLOR SLOW S]

–[SUPER NS]

–When [SHUTTR SPEED] is set to less than 1/30

–While executing [FADER]

–[COLOR BAR]

–[CINEFRAME]

The recording angle differs depending on the POWER switch setting position.

•The recording angle when the POWER switch is set to CAMERA-MEMORY is wider than when it is set to CAMERA-TAPE.

You cannot record a smooth transition on a tape from the last recorded scene to the next.

•Note the following.

–Perform END SEARCH. (p. 31).

–Do not remove the cassette. (The picture will be recorded continuously without a break even when you turn the power off.)

–Do not record pictures in the HDV and DVCAM (DV) formats on the same tape.

–You may not be able to record a smooth transition on a tape when [QUICK REC] is turned on.

The shutter sound is not heard when you record a still image.

• Set [BEEP] to [ON] (p. 65).

The external flash (optional) does not work.

•The power of the flash is not turned on, or the flash is not attached correctly.

•You cannot use the flash function together with:

–[ BURST] of [STILL SET]

–When the POWER switch is set to CAMERA-TAPE

•You cannot use the flash even if [FLASH MODE] of [FLASH SET] is set to [AUTO] or [AUTO ].

–[SPOT LIGHT], [SUNSET&MOON] or [LANDSCAPE] in [PROGRAM AE]

–[SPOT METER]/when [EXPOSURE] is set to [MANUAL]

END SEARCH does not work.

•The cassette was ejected after recording (p. 31).

•The cassette is new and has nothing recorded.

Troubleshooting

Continued 87