EXEC

Touch [NEXT][EXEC-A] or [EXEC- B] and the recording setting changes to the registered one. Touch [BACK] to register again or touch [END] to finish the operation.

By touching [SET] on the [EXEC] screen, you can select [TRANS TIME], [TRANS CURVE] or [REC LINK], and you can use the start timer.

TRANS TIME

Select transition time (2 to 15 seconds). (The default setting is 4 seconds.)

TRANS CURVE

Select the transition curve. The transition curve changes as follows.

*1: parameter level

*2: transition of time

LINEAR

Make the transition linearly.

��

��

SOFT STOP

Make the transition slowly at the end.

��

��

SOFT TRANS

Make the transition slowly at the beginning and end, and linearly in between.

��

��

START TIMER

Set the timer to start the shot transition.

OFF

The timer is not used.

5 sec

Start the shot transition after 5 seconds.

10 sec

Start the shot transition after 10 seconds.

20 sec

Start the shot transition after 20 seconds.

REC LINK

OFF

Not change when the recording starts.

SHOT-A

Change to SHOT-A when recording starts.

SHOT-B

Change to SHOT-B when recording starts.

•You cannot select [SHOT TRANS] while recording.

•If you register [SHOT TRANS], the [WHITE BAL.] setting is also registered at the same time.

•The recording angle varies during [SHOT TRANS].

•Use the tripod because [STEADYSHOT] does not function.

PictBridge PRINT

See page 75.

Menu the Using

55