–[PROGRAM AE]

–When [ WIDE SELECT] of [DV SET] is set to [4:3]

You cannot use [PICT. EFFECT].

•You cannot use [PICT. EFFECT] together with:

–[COLOR BAR]

–[OLD MOVIE] of [D. EFFECT]

•[PICT. EFFECT] cannot be set to [SKNTON DETAIL] while using the BACK LIGHT function.

You cannot use [SHOT TRANS].

•You cannot use [SHOT TRANS] together with:

–NightShot

–[COLOR BAR]

Dubbing/Editing/Connecting to other devices

Pictures from connected devices are not displayed on the LCD screen or the viewfinder.

•Set [DISP OUTPUT] to [LCD PANEL] (p. 65).

•You cannot input a signal to your camcorder if you press DISPLAY/BATT INFO while [DISP OUTPUT] is set to [V-OUT/PANEL] (p. 65).

Pictures from connected devices cannot be zoomed.

• You cannot zoom the pictures from connected devices on your camcorder.

Time code and other information appear on the display of the connected device.

•Set [DISP OUTPUT] to [LCD PANEL] while connected with an A/V connecting cable (p. 65).

You cannot dub correctly using the A/V connecting cable.

•You cannot input externally from a device connected with the A/V connecting cable.

•The A/V connecting cable is not connected properly.

Make sure that the A/V connecting cable is connected to the input jack of another device for dubbing a picture from your camcorder.

When connected using an i.LINK cable (optional), no picture appears on the monitor screen during dubbing.

•Set [VCR HDV/DV] on the (STANDARD SET) menu according to the requirements of the connected device (p. 57).

Troubleshooting

Continued 95