Troubleshooting (Continued)
You cannot add sound to the recorded tape.
• You cannot add sound to the recorded tape on this unit.
New sound added to a recorded tape on another camcorder is not heard.
•Adjust [
AUDIO MIX] from the [CH1, CH2] (original sound) side until the sound is heard appropriately (p. 58).
Still pictures cannot be dubbed from a tape to a “Memory Stick Duo.”
•You cannot record or a distorted picture may be recorded if the tape has been used repeatedly for recording.
You cannot input pictures.
•You cannot input pictures while [DISP OUTPUT] is set to
•You cannot input pictures if you press DISPLAY/BATT INFO.
Connecting to a computerThe computer does not recognize your camcorder. 
•Disconnect the cable from the computer and camcorder, then connect it again securely.
•Disconnect USB devices other than the keyboard, the mouse, and the camcorder from the
(USB) jack on the computer.
•Disconnect the cable from the computer and camcorder, restart the computer, then connect them again correctly.
You cannot monitor video that the camcorder is capturing. 
• Disconnect the cable from the computer, turn on the camcorder, then connect it again.
You cannot view the video recorded on a tape on the computer. 
•Disconnect the cable from the computer, then connect it again.
•Connect the i.LINK cable (optional) because you cannot copy pictures with the USB cable (supplied).
You cannot view the video and still images recorded on a “Memory Stick Duo” on the computer. 
•Insert a “Memory Stick Duo” in the correct direction, then push it all the way in.
•You cannot use an i.LINK cable (optional). Connect the camcorder and the computer using the USB cable (supplied).
•The computer does not recognize the “Memory Stick Duo” during camcorder operations such as tape playback or editing. Finish any camcorder operations before connecting the camcorder to the computer.
•Slide the POWER switch down to turn on the PLAY/EDIT lamp, then set [USB SELECT] to
96 [MEMORY STICK].