STANDARD SET menu (Continued)

MEMORY STICK

Select to view pictures in the “Memory Stick Duo.”

PictBridge PRINT

See page 75.

DISP GUIDE

You can easily check the meaning of each indicator that appears on the LCD screen.

DRUM RUN

Displays the total hours of drum rotation in 10-hour increments.

TAPE RUN

Displays the total hours of tape running in 10-hour increments.

THREADING

Displays the total number of tape unthreading operations in 10-operation increments.

Select area for guide.

DISP GUIDE

 

END

If you touch the area including the indicator that you want to check, the meanings of the indicators are listed on the screen. If you cannot find the indicator you want, toggle with / to search for it. To return to the area selection screen, touch . To finish operation, touch [END].

•The display items vary depending on the setting details.

STATUS CHECK

You can check the setup value of the following items. You can also check it with the ASSIGN button assigned to [STATUS CHECK] (p.27).

– AUDIO

Audio setup such as [ AUDIO MIX] (p. 58)

–OUTPUT

Output signal setup such as [VCR HDV/DV] (when the POWER switch is set to PLAY/ EDIT) (p. 57)

–ASSIGN

Functions assigned to the ASSIGN button (p. 27) and EXPOSURE/VOL lever (p. 49)

–HOURS METER

The cumulative operation time of your camcorder will be displayed with the total hours of operation, drum rotation, tape running, or the total number of tape unthreading operations.

OPERATION

Displays the total hours of operation in

62 10-hour increments.

TC/UB SET

The time code of this camcorder can be preset. You can reset or preset the time code even during recording.

TC/UB DISP

You can change the time value between the time code and user bits.

TC:[00:00:00:00] or [00:00.00:00] U-BIT:[00 00 00 00]

TC PRESET

You can preset or reset the time code.

Select the first 2 digits by touching

/ and touch , and set up the other digits.

The confirmation screen appears and touch

.

To cancel the setting, touch [CANCEL] in step .

•To reset the time code (00:00:00:00), touch [RESET] in step .

•Set a time code between 00:00:00:00 and 23:59:59:29.

UB PRESET

You can preset or reset the user bit.

Select the first 2 digits by touching

/ and touch , and set up the other digits.

The confirmation screen appears and touch

.

To cancel the setting, touch [CANCEL] in step .

•To reset the user bit (00 00 00 00), touch [RESET] in step .