Programming the Remote Control
If you have video equipment other than Sony brand (or if you have a Sony DVD/VCR combination unit) that you want to control with the TV’s remote control, use the following procedure to program the remote control.
✍ The equipment must have infrared (IR) remote capability in order to be used
|
| with the remote control. |
| 1 | Turn to the list of “Manufacturer’s Codes” on page 50, and find |
|
| the |
|
| equipment. (If more than one code number is listed, use the |
|
| number listed first.) |
| 2 | Press CODE SET. |
| 3 | Press the VCR/DVD FUNCTION or SAT/CABLE FUNCTION button. |
| 4 | Using the |
|
| number. |
| 5 | Press the ENTER button. |
|
|
|
|
| ✍ You must do step 5 within 10 seconds of step 4, or you must redo |
|
| steps 2 through 5. |
| 6 |
|
| To check if the code number works, aim the TV’s remote control | |
|
| at the equipment and press the POWER button that corresponds |
|
| with that equipment. If it responds, you are done. If not, try using |
|
| another code listed for that manufacturer. |
|
|
|
Notes | ❑ | If more than one code number is listed, try entering them one by |
|
| one until you come to the correct code for your equipment. |
❑ If you enter a new code number, the code number you previously entered at that setting is erased.
❑ In some cases, you may not be able to operate your equipment with the supplied remote control. In such cases, use the equipment’s own remote control.
❑ Whenever you remove the batteries to replace them, the code numbers may revert to the factory setting and must be reprogrammed.
Remote Control SETUP
SETUP
49
