Audio Settings
Speaker | TV Speaker | Turns on and outputs the TV’s sound from the TV speakers. |
| Audio System | Turns off the TV speakers and outputs the TV’s sound from |
|
| external audio equipment connected to the audio output |
|
| sockets on the TV. |
|
| You can also turn on the connected equipment that is |
|
| compatible with control for HDMI, after making the |
|
| appropriate settings of control for HDMI. |
|
|
|
Audio Out | Variable | When using an external audio system, volume output from |
|
| audio out can be controlled using the TV’s remote. |
|
|
|
| Fixed | The audio output of the TV is fixed. Use your audio |
|
| receiver’s volume control to adjust the volume (and other |
|
| audio settings) through your audio system. |
|
| |
i Speaker Link | Switches the TV’s internal speakers on/off when you connect headphones to the | |
| TV. |
|
|
|
|
| On | Sound is output only from the headphones. |
|
|
|
| Off | Sound is output from the TV and the headphones. |
|
| |
i Volume | Adjusts the volume of the headphones when “i Speaker Link” is set to “Off”. | |
|
| |
i Dual Sound | Sets the sound from the headphones for a bilingual broadcast. | |
|
| |
Woofer Level | Adjusts the bass level to taste since the bass level varies depending on where the | |
| TV is located. Decrease the level if you feel too much bass is being output, and | |
| increase the level if you feel not enough bass is being output. |
~
•This adjustment is only necessary when the TV is first installed or when its location has been changed. Adjustment is not required for regular listening.
Set-up
USB Auto Start | Automatically starts photo playback when the TV is turned on and a digital still |
| camera or other device storing photo files is connected to the USB port and then |
| turned on. |
~
•Playback does not start automatically if the TV is turned on after connecting the digital still camera or other device to the USB port.
Quick Start | The TV turns on faster than usual by turning on the power using the remote. |
| However, power consumption in standby mode is approximately 20 watts higher |
| than usual. Up to 3 out of 5 time zones can be set. |
|
|