Storing the cables in the display stand
Remove the cable cover on the display stand to store the mains lead and display interface cable.
1 Pull the top of the cable cover of the |
|
display stand towards you to unlock it. | Rear of display |
Cable cover
2 Detach the cable cover and remove.
3 Store the cables in the display stand. Pass the cable through the centre hole. Set the cable cover in the groove at the bottom of the stand, and then push it shut.
The branch point of the display cable's black and white connectors is thick, and will not fit under the cable cover. Arrange the branch point so that it is outside and above the cable cover.
Branch point
Groove at the GB bottom of the
stand
Installation 21