Sony KP-57WS500, KP-65WS500, KP-51WS500, KP-46WT500 manual Connecting an AV Receiver

01COV.book Page 30 Tuesday, July 30, 2002 3:46 PM

Installing and Connecting the Projection TV

Connecting an AV Receiver

For greater control of all audio and video equipment, connect an AV receiver.

✍Change “Video Label” for the VIDEO 1 input to “Receiver” (see page 59).

Disconnect all power sources before making any connections.

1

2

3

4

5

6

Rear of projection TV

Connect the coaxial cable from the incoming cable connection or antenna to IN on the VCR.

Using a coaxial cable, connect OUT on the VCR to VHF/UHF on the projection TV.

Using a VIDEO cable, connect VIDEO of VIDEO 1 IN on the projection TV to MONITOR OUT on the AV receiver.

Using an AUDIO/VIDEO cable, connect TV OUT on the projection TV to AUDIO/VIDEO 2 IN on the AV receiver.

Using an AUDIO/VIDEO cable, connect the video equipment to the AV receiver.

Select the Setup menu and set “Video Label” to “Receiver” to fix your TV’s input to AV receiver (see “Video Label” on page 59).

Coaxial cable (not supplied)	VMC-810S/820S
	(not supplied)

VCR

VIDEO AUDIO-L AUDIO-R

VIDEO

Cable/ Antenna

VMC-810S/820S (not supplied)

VMC-810S/820S (not supplied)
AUDIO/	AUDIO/
VIDEO 2 IN
	VIDEO 1 IN

VMC-10HG (not supplied)

30

MONITOR

OUT

AV receiver AUDIO/VIDEO 1 OUT

Model name1[KP-46WT500] Model name2[KP-51WS500] Model name3[KP-57WS500] Model name4[KP-65WS500]

[4-088-847-12]