01COV.book Page 68 Tuesday, July 30, 2002 3:46 PM
Other Information
Programming the Remote Control
The remote control is preset to operate Sony brand video equipment.
Sony | Switch Position | Programmable |
Equipment | on Remote Control | Code Number |
|
|
|
Beta, ED Beta VCRs | AV1 | 303 |
|
|
|
8 mm VCR | AV2 | 302 |
|
|
|
VHS VCR | AV3 | 301 |
|
|
|
DVD Player | DVD | 751 |
|
|
|
If you have video equipment other than Sony brand that you want to control with the projection TV’s remote control, use the following procedures to program the remote control.
✍The equipment must have infrared (IR) remote capability in order to be used with the remote control.
From the “Manufacturer’s Codes” listed on page 70, select the
To program a cable box or a satellite receiver
1
2 Press CODE SET inside the panel.
3
40-9buttons.
5
6 To check if the code number works, aim the projection TV’s remote control at the component and press the green POWER button that corresponds with that component. If it responds, the programming is completed. If not, try using the other codes listed for that manufacturer.
68
Model |