| Other Information |
|
|
Problem | Possible Remedies |
Switching the channel while | ❏ This is because the program on the new channel does not have |
using the TV speakers as a | sound. Switch the Center Speaker In option to Off (see page 115). |
center speaker causes sound to |
|
stop coming out of the TV |
|
speakers |
|
|
|
Switching the Center Speaker | ❏ Make sure to connect the audio output jacks on an audio device, such as a VCR or |
In option to Off causes sound to | a DVD player, to the audio input jacks on the media receiver unit. For the devices |
stop coming out of the TV | that you wish to output sound from the TV speakers, connect them to the audio |
speakers | input jacks as well as the video input jacks on the media receiver unit. |
|
|
There is a whirring sound | ❏ This is the sound of the internal fans of the display unit and the media receiver |
| unit. It is not a malfunction. |
|
|
Channels
Problem | Possible Remedies | |
Cannot receive upper channels | ❏ | Press ANT to select the VHF/UHF input (see page 62). |
(UHF) when using an antenna | ❏ | Use Auto Program in the Channel menu to add receivable channels that are not |
|
| presently in the TV’s memory (see page 119). |
|
|
|
TV is fixed to one channel | ❏ | Use Auto Program in the Channel menu to add receivable channels that are not |
|
| presently in the TV’s memory (see page 119). |
| ❏ | Check your Channel Fix settings (see page 119). |
|
|
|
Cannot receive any channels | ❏ | Use Auto Program in the Channel menu to add receivable channels that are not |
when using cable TV |
| presently in the TV’s memory (see page 119). |
| ❏ | Press ANT to select the CABLE input (see page 62). |
|
|
|
Cannot receive or select | ❏ | Use Auto Program in the Channel menu to add receivable channels that are not |
channels |
| presently in TV’s memory (see page 119). |
|
|
|
Some digital cable channels are | ❏ | Certain cable companies have limitations on the broadcast of digital cable |
not being displayed |
| channels. Check with your cable company for more information. |
| ❏ | The digital cable channel may be set to Hidden in the Channel menu (see page |
|
| 120). |
|
|
|
Information Other
General
Problem | Possible Remedies |
|
|
How to reset TV to factory settings
❏Turn on the TV. While holding down the RESET button on the remote control, press the POWER button on the Media Receiver Unit. (The TV will turn itself off, then back on again.) Release the RESET button.
How to restore Video settings | ❏ | Press RESET on the remote control while in the Video menu (see page 110). | |
to factory settings |
|
|
|
|
|
|
|
How to restore Audio settings | ❏ | Press RESET on the remote control while in the Audio menu (see page 114). | |
to factory settings |
|
|
|
|
|
|
|
Cannot cycle through the other | ❏ | Be sure the Label Video Inputs option is not set to Skip (see page 125). | |
video equipment connected to |
|
|
|
the TV |
|
|
|
|
|
|
|
|
| (Continued) |
141