Setting Up the TV

Connecting the TV

✍Disconnect all power sources before making any connections.

1Connect the display interface cable (supplied or VMC-X10 as an optional accessary) to the DISPLAY SIGNAL IN jacks, and the AC power cord (supplied) to the AC IN jack of the unit.

BLACKWHITE

DISPLAY SIGNAL IN

AC IN

BLACKWHITE

DISPLAY SIGNAL IN

AC IN

Display interface cable (supplied or VMC-X10 as an optional accessory)

AC power cord

Tighten the (supplied) screw slowly

until the screw is stabilized.

✍Do not tighten the screws too much. It may damage the screws.

✍Insert the connector until you hear a click. (Both sides of the connector should be held securely by the clips.)

After connecting, make sure the connectors are firmly plugged in and can not easily be pulled out.

✍Refer to the optional accessory’s instruction manual for proper cable installation.

✍If you wish to install the media receiver unit and the display unit away from each other, use an optional display cable, VMC-X10, which allows you to place the two units up to 10 meters away from each other.

2 Secure the AC plug holder to the display’s AC IN jack.

28