Setting Up the TV
DVD Player with | Use this hookup if: | ||
S VIDEO and Audio | ❑ | Your DVD player does not have component (YPBPR) jacks. | |
Connectors | |||
|
| ||
| Disconnect all power sources before making any connections. | ||
| 1 | Using an A/V cable, connect the DVD player’s AUDIO OUT jacks to | |
|
| the TV’s AUDIO IN jacks. | |
| 2 | Using an S VIDEO cable, connect the DVD player’s S VIDEO jack to | |
|
| the TV’s S VIDEO jack. |
TV the Up Setting
S VIDEO cable
DVD player
Rear of Media Receiver Unit
S VIDEO
S VIDEO
VIDEO
AUDIO L
R
13
Cables are often
Connect red to red, |
white to white, etc.
A/V cable
✍If your DVD player is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S VIDEO cable.
✍To watch the DVD player, press TV/VIDEO repeatedly to select the DVD input (VIDEO 1 in the illustration). If you have a
✍To control DVD functions with the TV remote control, see “Operating a DVD Player” on page 67.
✍To label video inputs to easily identify equipment connected to the TV, see the instructions for setting up Video Labels on page 125.
45