DVD Player or Digital Satellite Receiver via an AV Receiver with
CENTER SPEAKER IN Terminals
Setting Up the TV
Use this connection if you have a digital audio device that is PCM/Dolby Digital compatible, such as an AV receiver with a Dolby Pro Logic system decoder.
Disconnect all power sources before making any connections. | Setting |
|
1 | Using a speaker cord, connect the TV’s CENTER SPEAKER IN | Up | |
| terminals to the AV receiver’s CENTER SPEAKER OUT terminals. | ||
| the | ||
2 | Using a component video cable, connect the DVD player or digital | ||
TV | |||
|
|
satellite receiver’s YPBPR jacks to the YPBPR jacks on the TV. Use the HD/DVD IN 4 connections. Using an audio cable, connect the DVD player or digital satellite receiver’s AUDIO OUT to the TV’s AUDIO IN jacks.
✍If your DVD player does not have component (YPBPR) jacks, you can connect the DVD player with A/V connectors. Use the connection described on page 45.
✍If your digital satellite receiver has an HDMI connector, use the connection described on page 51 for best picture quality.
3 Using an optical digital cable, connect the DVD player or digital satellite receiver’s OPTICAL OUT jack to the AV receiver’s OPTICAL IN jack.
(Continued)
53