Installing the Media
Receiver Unit
Vertically
Setting Up the TV
When you install the media receiver unit vertically, use the supplied stand for |
| |
vertical installation. Attach the stand to the right side of the media receiver |
| |
unit. When you attach the stand, use the edge of a desk or a table, as shown |
| |
| ||
below. | Setting | |
1 Remove the two small screws from the right side of the media receiver | ||
Up | ||
unit. | ||
Media receiver unit | the | |
TV | ||
|
2 Match the two screw holes on the stand to those on the media receiver unit.
3 Insert the two screws with washers (supplied) into the holes and tighten them securely.
Desk or table
Vertical installation stand
27