Command: 0BBH
Function : Returns information for the “REPEAT MODE SELECT”: 03BH.
DATA: 1 DATA1
000H: REPEAT OFF
001H: REPEAT ON REQUEST command: 03BH
REC MODE RETURNCommand: 0BCH
Function : Return information for the “REC MODE SELECT”: 03CH.
DATA: 1 DATA1
000H: STEREO REC
001H: MONORAL REC REQUEST command: 03CH
KILL LOCAL MODE RETURNCommand: 0BDH
Function : Return information for the “KILL LOCAL MODE SELECT”: 03DH.
DATA: 1 DATA1
000H: KILL ALMOST
001H: KILL ALL REQUEST command: 03DH
SWITCH ENABLE RETURN (KILL LOCAL function)Command: 0CCH
Function : Returns information for the “SWITCH ENABLE SELECT (KILL LOCAL function)”: 04CH.
DATA: 1 DATA1
000H: DISABLE
001H: ENABLE REQUEST command: 04CH
Command: 0D0H
Function : Returns information for the “MECHA STATUS SENSE”: 050H.
DATA: 1 DATA1
bit7: REC bit (in RECORD mode)
bit6: TOC WRITING (writing TOC on disc)
bit5: CUE bit (during fast forward scan)
bit4: STOP bit (in STOP mode)
bit3: REVERSE bit (during fast rewind scan) 001H: PLAY
010H: PAUSE ON
012H: STOP
013H: EJECT
014H: DISC OUT (disc has been ejected)
023H: CUE (during fast forward scan)
02BH: CUE (during fast rewind scan)
052H: TOC WRITING
080H: REC STANDBY, REC PAUSE
Note
Each “bitX” listed above expresses the DATA definition listed under “bitX” in binary notation. Therefore, the commands actually returned are the DATA only such as “001H” and “023H”.
REQUEST command: 050H
TRACK No. STATUS RETURNCommand: 0D5H
Function : Returns information for the “TRACK No. STATUS SENSE”: 055H.
DATA: 3
DATA1 bit0: EOM STATUS
DATA2 (10, 1) {*001 to 255, decimal number} DATA3 (**, 100)
REQUEST command: 055H
DISC STATUS RETURNCommand: 0D6H
Function : Returns information for the “DISC STATUS SENSE”: 056H.
DATA: 1
bit4: REC PROTECT (record protect status)
bit3: PRE RECORDED DISC (a premastered disc is loaded)
bit0: DISC PRESENT (a disc is loaded) REQUEST command: 056H
Appendix
Appendix