Recording 4 Chapter
To eject the disc
Press the STOP button to stop the MD, then press the EJECT button.
Preventing accidental erasure
Slide the
Rear of the disc
Slide the tab in the direction of arrow.
To record in monoaural mode
The monouaral recording mode allows you to record about twice as much material on the same amount of the tape than stereo recording mode. Use the Setup menu to choose monouaral recording mode.
1 Press the EDIT/NO button while holding down the STOP button.
The Setup menu appears in the display.
2
3 Press the AMS control.
The indication flashes and the display for setting the recording mode appears.
4 Turn the AMS control clockwise to display “F04:Monoral Rec,” then press the AMS control. The “MONO” indication lights up.
5 Press the EDIT/NO button to exit from the Setup menu.