Preparations 3 Chapter
Main/sub deck indication
When you specify an
F05
D u p M a i n
Main/sub deck indication
Disabling operation buttons on a sub or end deck
You can disable the operation buttons on a sub or end deck to prevent mistaken operations during
See
You can use any IBM keyboard to control the MD deck. The supplied keyboard template has the same key indications found on the front panel of the deck. Be sure to remove the cap from the KEY BOARD connector when connecting a keyboard.
= +
0 )
p | (P | r |
KEY BOARD connector
Specifying the keyboard type
Use the Setup menu to specify the keyboard type.
1 Press the EDIT/NO button while holding down the STOP button.
The Setup menu appears in the display window.
2 Turn the AMS control to display the menu item F12 (“KB ENG 101” or “KB JPN 106”) in the window.
F12
K B E N G 1 0 1
3 Press the AMS control.
The indication flashes and you can change the setting.
4 Turn the AMS control to select either “KB ENG 101” or “KB JPN 106.” Press the AMS control to select the item.
5 Press the EDIT/NO button to exit from the Setup menu.