Playback 5 Chapter
To specify tracks for Multi-Access playback
1 5
= +
0 )
p | (P | r |
2,3,4
1 Press the EDIT/NO button. The Edit menu appears.
2 Turn the AMS control to display
3 Press the AMS control.
The display for specifying tracks appears.
001 00 00 00 / 0 /
To delete tracks from the track list for Multi- Access playback
Press the 0or )button until the track to be deleted begins flashing, then press the EDIT/NO button.
To change a track number
Press the 0or )button until the track number to be changed begins flashing, turn the AMS control to change the track number, then press the ENTER/YES button. Press the 0or )button again to change another track number.
To delete all tracks
Hold down the EDIT/NO button until all the tracks are deleted.
4 Turn the AMS control to select a track, then press the AMS control.
The position for the second track begins flashing. Repeat this step to specify up to 10 tracks.
002 00 34 65 / 3 - 0 /
5 Press the ENTER/YES button to complete the track specification procedure.
To specify track numbers using the numeric buttons
In step 4 , use the numeric buttons on the remote controller or a keyboard to enter track numbers. After entering a track number, the next track position begins flashing immediately.
To change a part of the track list
In step 3, press the 0or )button until the track to be changed starts flashing. Use the numeric button(s) of the remote controller or the keyboard to change the track number, then press the ENTER button.
Press the 0or )button again to change another track number.
Storing the beginning of a track
The beginning of a track is stored in the
•you change the disc while the
•you specify a track for
•you select the