6-1 Overview of Editing Functions
Use the Edit menu to select the editing functions. Press the EDIT/NO button, then turn the AMS control to display each edit function and its number one at a time.
There are 10 editing functions.
•(001) Name ? — Recording the title of tracks and discs
•(002) Erase ? — Erasing tracks
•(003) Move ? — Moving tracks
•(004) Combine ? — Combining tracks
•(005) Divide ? — Dividing tracks
•(006) All Erase ? — Erasing all tracks on a disc
•(007) Undo ? — Canceling the last editing operation
•(008) Cue Point ? — Setting cue points
•(009) Head Trim ? — Trimming the starting portion of a track
•(010) End Trim ? — Trimming of ending portion of a track
There are two editing modes.
Disc Edit mode: In this mode, the results of editing operations are recorded in the TOC on the disc.
RAM Edit mode: In this mode, editing is done temporarily. This mode may be used to edit data on
To select an editing mode
| = + |
| 0 ) |
p (P | r |
1 | 2 – 5 |
1 Press the EDIT/NO button while holding down the STOP button.
The Setup menu appears.
2 Turn the AMS control until menu item F09 (“Disc Edit” or “Ram Edit”) appears.
F09
D i s c E d i t
3 Press the AMS control.
The indication flashes to show that you can change the setting.
4 Turn the AMS control to select the editing mode. Turning the control clockwise to select “Disc Edit,” and counterclockwise to select “Ram Edit.”
5 Press the AMS control to exit from the Setup menu.
The function of the ENTER/YES button during editing operations
In Disc Edit mode, when you finish an editing operation and press the ENTER/YES button with the MD deck stopped, the MD deck writes the changes to the TOC on the disc.
If you don’t press the ENTER/YES button after the editing operation, the TOC data will be written on the disc when you press the EJECT button or when you press the ENTER/YES button after another editing operation.
In Ram Edit mode, when you press the ENTER/YES button with the MD deck stopped, “TOC Write?” appears. Pressing the ENTER/YES button causes the MD deck to write the changes to the TOC on the disc. Pressing the EDIT/NO button at this time cancels the writing of the changes to the TOC on the disc.
If you don’t press the ENTER/YES button after the editing operation, “TOC Write?” appears when you press the EJECT button. Pressing the EJECT button again or the EDIT/NO button causes the MD deck to eject the disc without writing the changes to the TOC on the disc.
Functions Editing 6 Chapter
Functions Editing 6 Chapter
Chapter 6 Editing Functions |