7-9 Reading the Hours Meter
This function allows you to display the accumulated |
|
|
| |
| Note |
| ||
operating time of the laser diode (during recording |
|
| ||
| When the BU block is replaced, a new | |||
operations) and of the spindle motor. Use this |
| |||
installed and the hours meter is zeroed. Since this | ||||
information as the basis for replacing the BU block. | ||||
resets the other menu functions as well, you must | ||||
| ||||
| make the applicable settings again. |
To display the digital hours meter
3
=+
0)
p | (P | r |
12
1 Press the EDIT/NO button while holding down the STOP button.
The Setup menu appears.
2 Turn the AMS control until the menu item F25.
F25
S 0 0 0 1 L 0 0 0 0
S:Accumulated spindle motor operating time
L:Accumulated laser diode operating time
3 After checking the meter, press the EDIT/NO button to exit the Setup menu.
Menu Setup 7 Chapter
Chapter 7 Setup Menu