To change a character entry
Press the 0or )button to the character to be changed. The character will flash. Press the CANCEL button and repeat the step 2 and 3.
Enter the disc or track title with the character and numeric buttons on the remote controller.
Press either CAPS (uppercase) or SML (lowercase) to select the type of characters to be entered.
2
3
4 Repeat steps 2 and 3 until the entire title appears in the display.
Use the title function to add titles to your own discs and tracks using the character and numeric buttons on the remote controller. The maximum number of characters for all titles on a disc is 1,792.
Adding a disc or track title
3
1,5 2
1 Press the NAME button.
The display changes to title-entry mode.
To add a disc title
Enter a disc title while the MD deck is stopped.
To add a track title
You can add a track title when (1) the MD deck is playing or recording a track; (2) when the MD deck is in playback pause, or (3) when the MD deck is stopped on the track to be entitled.

4-4 Adding Disc and Track Titles

5 Press the NAME button to record the title on the disc.

To cancel the title entry process

Press the pbutton.

Note

If “Protected” appears in the display

The record-protection slot on the disc is open and titles cannot be written to the disc. To add titles to the disc, eject the disc and close the slot.

Erasing a disc or track title

Do the procedure below to erase a disc or track title using the remote controller.

1 Press the NAME button while the deck is playing or pausing on the track whose title is to be erased. To erase the disc title, press the button while the deck is stopped.

2 Hold down the CANCEL button.

3 Press the ENTER button when the last character of the title has disappeared and the cursor remains.

Recording 4 Chapter

Chapter 4 Recording 4-5