Sony MDS-E11 Recording Over Existing Tracks, Adjusting the Recording Level

Recording Over Existing Tracks

Follow the procedure below to record over existing material just as you would on an analog cassette tape.

6

-AMS ±

á P p

=/+ = + r

0 )

1Carry out Steps 1 to 5 in “Recording on an MD” on page 6.

2Turn AMS (or press =or +) until the number of the track to be recorded over appears.

3To record from the start of the track, continue from Step 6 in “Recording on an MD” on page 7.

zTo record from the middle of the track

1 After Step 2 above, press áto start playback.

2 Press Pwhere you want to start recording.

3 Continue from Step 6 in “Recording on an MD” on page 7.

Note

You cannot record from the middle of the track during “PROGRAM”or “SHUFFLE”play.

Recording on MDs

Adjusting the Recording Level

When recording with INPUT set to ANALOG and the signal input through LINE (ANALOG) IN jacks, use REC LEVEL to adjust the recording level before starting recording.

You cannot adjust the recording level during digital recording.

REC LEVEL

1Carry out Steps 1 to 6 in “Recording on an MD” on pages 6 and 7.

2Play the portion of the program source with the strongest signal level.

3While monitoring the sound, turn REC LEVEL to adjust the recording level so that the peak level meters reach their highest point without turning on the OVER indication. Occasional lighting of “OVER” is acceptable.

4Stop playing the program source.

5To start recording, follow the procedure starting from Step 8 in “Recording on an MD” on page 7.

11