Getting Started
Unpacking
Check that you received the following items:
•Remote commander (remote)
•R6 (size AA) batteries (2)
Inserting batteries into the remote
You can control the recorder using the supplied remote.
Insert two R6 (size AA) batteries by matching the + and – on the batteries. When using the remote, point it at the remote sensor gon the recorder.
zWhen to replace batteries
With normal use, the batteries should last for about six months. When the remote no longer operates the recorder, replace all the batteries with new ones.
Notes
•Do not leave the remote near an extremely hot or humid place.
•Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
•Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction.
•If you don’t use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.
Connection
Overview
This section describes how to hook up the MD recorder to other components such as a mixer, CD player or DAT recorder. Be sure to turn off the power of each component before connection.
to a wall outlet
PC or similar
equipment
External controller
Remote controller, or other controller
OUT IN
Mixer
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DIGITAL |
|
|
| DIGITAL |
| OUT |
| IN | ||
COAXIAL OUT |
|
|
| COAXIAL IN |
|
| ||||
|
|
|
|
|
|
|
CD player, DAT
recorder, or MDMixer recorder, etc.
: Signal flow
4