Using the Display Z
You can use the display to check disc and track information such as the total track number, total playing time of the tracks, remaining recordable time of the disc and disc name.
6
DISPLAY SCROLL
áP p
Checking the total track number, total disc playing time, remaining recordable time of the disc and the title of the disc
Each time you press DISPLAY/CHAR (or DISPLAY) while the recorder is stopped, you can change the display as follows:
Total number of tracks and total disc playing time of all recorded tracks
Press
Remaining recordable time of the disc (Recorded MDs only)
The remaining recordable time of the disc is not shown for premastered MDs.
Press
Disc name
Press
When you insert an MD, the disc name, total number of tracks, and total disc playing time appear in the display as follows:
Disc name
Total number of tracks Total disc playing time
To label a recordable disc and its tracks, see “Labeling Recordings” on page 26.
Note
When you insert a new MD or turn off the recorder and turn it on again, the last item displayed will reappear.
However, if you disconnect the AC power cord, the display will show the total number of tracks and total disc playing time of all recorded tracks the next time you turn on the recorder, no matter what the last display was.
Checking remaining time and the title of a trackPress DISPLAY on the remote controller while playing a track.
Each time you press DISPLAY, the track number and remaining time of the current track are displayed in the following sequence:
Track number and playing time of the current track
Press
Track number and remaining time of the current track
Press
Track name
If no title is recorded, “No Name” appears, followed by the elapsed playing time.
Press
(Continued)
16