Playing MDs

Creating Your Own Program (Program Play) Z

You can specify the playback order of the tracks on an MD and create your own programs containing up to 25 tracks.

6

CONTINUE PROGRAM

Number buttons

>25

CLEAR

á á

P p p

=/+

=

+ r

0)

1Press PROGRAM on the remote controller while the recorder is stopped.

2Press the number buttons to enter the tracks you want to program in the order you want.

To program a track with a number over 25, use the >25 button (see page 17).

If you’ve made a mistake

Press CLEAR, then press the correct number button.

3Repeat Step 2 to enter other tracks. Each time you enter a track, the total program time is calculated and appears in the display.

4Press áto start Program Play.

To cancel Program Play

Press CONTINUE in the remote controller while the recorder is stopped. “P” (PLAY MODE) disappears from the display.

zYou can program the same track repeatedly

Press the appropriate number button as many times as you want to repeat.

zThe program remains even after Program Play ends

When you press á, you can play the same program again.

Notes

•The program created by the Program Play Function is lost when you press ¤EJECT to take out the MD.

•The program created by the Program Play Function is lost when you turn off the recorder or disconnect the AC power cord.

•The display shows “- -m - -s” instead of the total playing time when the total playing time of the program exceeds 160 minutes.

Checking the track order

You can check the order of tracks in your program during playback or playback pause.

Turn AMS (or press =or +) during playback or playback pause. The track numbers appear in the order they were programmed.

Changing the track order

You can change the order of the tracks in your program before you start playing.

To

Do the following:

 

 

Erase the last track in the

Press CLEAR. Each time you

program Z

press this button, the last

 

track will be cleared.

 

 

Add tracks to the end of the

Carry out Steps 2 and 3 in

program

“Creating Your Own

 

Program.”

 

 

Change the whole program

1 Press CONTINUE.

completely

2 Carry out Steps 1 to 3 in

 

“Creating Your Own

 

Program.”

 

 

20