Editing Recorded MDs

Moving Recorded Tracks (Move Function)

Use the Move Function to change the order of any track. After you move a track, the track numbers between the new and old track positions are automatically renumbered.

Example: Moving track C to track position 2

Track

1

 

 

2

 

3

 

 

 

4

 

 

 

number

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A

B

 

C

 

 

 

 

D

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Moving

 

 

 

 

 

 

Track C moves to

 

 

 

 

 

 

track position 2

 

 

 

 

 

 

 

 

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

 

3

 

 

4

 

 

 

 

 

 

 

 

 

 

 

A

C

 

B

 

 

 

 

D

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EDIT/NO

YES

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-AMS± p

1While the recorder is stopped or during playback pause, press EDIT/NO to display “Edit Menu.”

2Turn AMS until “Move?” appears in the display, then press AMS.

3Turn AMS until the track number you want to move appears in the display, then press AMS.

4Turn AMS until the new track position appears.

5Press AMS or YES.

After you have moved the track, “Complete” appears for a few seconds.

To cancel the Move Function

Press EDIT/NO or p.

Labeling Recordings

(Title Function)

You can create titles for your recorded MDs and tracks. Titles — which may consist of uppercase and lowercase letters, numbers and symbols for a maximum of about 1,700 characters per disc — appear in the display during MD operation.

EDIT/NO YES

-AMS± =/+

Use the following procedure to label a track or an MD.

You can label a track during play, pause, record, or stop mode. If the track is playing or recording, be sure to finish labeling before the track ends. If the track ends before you’ve completed the labeling procedure, only the characters already entered are recorded automatically.

1Press EDIT/NO to display “Edit Menu.”

2Turn AMS until “Name in?” appears in the display, then press AMS.

3Turn AMS to select “Disc” or track number, then press AMS.

When you label an MD, select “Disc” and when you label a track, select the track number. Note that during recording, the recorder changes to character typing mode and a cursor starts flashing.

26