Additional Information
Functions of REMOTE Terminals
RELAY REC/PLAY
— Stereo
Where multiple recorders are hooked up together, after the first recorder has finished recording or playing, control signals are automatically transferred to the second recorder through the RELAY terminal to direct it to start recording or playing.
Relay Play
Allows multiple recorders hooked up together to repeat continuously in sequence.
Recorders may be hooked up in a loop so they will repeat continuously.
Cabling for Relay Play
Connect RELAY OUT of the first recorder and RELAY IN PLAY of the second recorder with a stereo mini- plug cable (such as
To
Mixer
1The first recorder starts playing.
2When the first recorder finishes playing, the second recorder starts playing.
3The third and subsequent connected by cabling to their RELAY IN PLAY terminals start playing in sequence as soon as the preceding recorders in the chain finish playing.
Note
This recorder starts playing when it receives a relay control signal only when:
•It is loaded with a playable MD.
•It is stopped.
•The Edit Menu or Setup Menu is not open.
If REPEAT is set, control signal output will be suppressed, disabling the relay play function.
Relay Record
Allows multiple recorders hooked up together to record continuously in sequence.
Cabling for Relay Record
Connect RELAY OUT of the first recorder and RELAY IN REC of the second recorder with a stereo
From divide equipment
From divide equipment
From divide equipment
31