Editing Recorded MDs

Labeling tracks and MDs with the remote Z

6

Alphabet/number buttons

NAME CLEAR

á

P p

p

CHAR

r

NUM

= +

0/) 0 )

1Press NAME repeatedly until a flashing cursor appears in the display, then do the following:

To label

Make sure that the recorder is

 

 

A track

Playing, pausing, recording the track

 

to be labeled, or stopped after

 

locating the track to be labeled

 

 

An MD

Stopped with no track number

 

appearing in the display

 

 

2Select the character type as follows:

To select

Press

 

 

Uppercase letters

CHAR repeatedly until “Selected

 

AB” appears in the display

 

 

Lowercase letters

CHAR repeatedly until “Selected

 

ab” appears in the display

 

 

Numbers

NUM repeatedly until “Selected

 

12” appears in the display

 

 

3Enter one character at a time.

After you enter a character, the cursor shifts rightward and waits for the input of the next character.

4Repeat Steps 2 and 3 until you have entered the entire title.

If you entered the wrong character

Press 0or ) until the character to be corrected starts flashing.

Press CLEAR to erase the incorrect character, then enter the correct one.

5Press NAME again.

The entered title appears on the left side of the display window after the label has been recorded.

To cancel labeling

Press p.

Changing an existing title Z

1Press NAME, then do the following:

To change

Make sure that the recorder is

 

 

A track title

Playing, pausing the track whose title

 

is to be changed, or stopped after

 

locating the track whose title is to be

 

changed

 

 

A disc name

Stopped with no track number

 

appearing in the display

 

 

2Keep pressing CLEAR (or EDIT/NO on the recorder) until the current title is erased.

3Enter the new title.

Carry out Steps 4 to 7 of “Labeling Recordings” on page 26, or Steps 2 to 4 of “Labeling tracks and MDs with the remote” on page 28.

4Press NAME.

28