Recording on MDs

Recording Using a Timer

A commercially available timer connected to the recorder allows it to start or stop recording at a preappointed time. For additional information, refer to the information manual for the timer.

1Turn on the timer.

2Perform steps 1 to 5 in “Recording on an MD” (see page 6).

3Choose “Timer REC” from the Setup Menu.

1.While the recorder is stopped, press EDIT/NO twice to display “Setup Menu.”

2.Turn AMS until “Timer” appears in the display, then press AMS.

3.Turn AMS until “Timer REC” appears in the display, then press AMS.

4.Press EDIT/NO.

4Set the timer to the desired operation.

5Having finished recording with a timer, choose “Timer OFF” from the Setup Menu.

1.Perform steps 1 and 2 in step 3 above.

2.Turn AMS until “Timer OFF” appears in the display, then press AMS.

3.Press EDIT/NO.

If you leave the setup Menu “Timer REC” setting, the recorder will begin recording automatically next time it is powered on.

After timer recording, be sure to turn on the recorder within one month

When you turn on the recoder next time, the recording will be transfferd to the MD. If you leave the recorder unpowered, the recording will not be transferred to the MD when you turn on the recorder.

15