Recording on MDs
Synchro-Recording With a Sony CD Player Z
By connecting your recorder to a Sony CD player, you can easily dub CDs onto MDs using the CD synchro buttons on the remote. If your recorder is connected to a Sony CD player by a digital input cable, track numbers are automatically marked as on the original, regardless of whether “LevelSync ON” or “LevelSyncOFF” is selected. If your recorder is connected to a Sony CD player by audio connecting cords through LINE (ANALOG) IN, track numbers are automatically marked when you select “LevelSync ON” (see “Marking Track Numbers While Recording” on page 12).
As the same remote controls both the CD player and the recorder, you may have trouble operating both units if they are far from each other. If you do, place the CD player close to this recorder.
6
STANDBY
| á | P p |
START | = + | r |
|
|
0)
6Press START.
The recorder starts recording and the CD player starts playback.
The track number and elapsed recording time of the track appear in the display.
If the CD player does not start playing
Some CD player models may not respond when you press START on the remote of the recorder. Press Pon the remote of the CD player instead.
7Press STOP to stop
To pause recording
Press STANDBY or CD PLAYER P.
To restart recording, press START or CD PLAYER P. A new track number is marked each time you pause recording.
z You can use the remote of the CD player during | |
When you press p, the CD player stops and the | |
recorder pauses for recording. | |
When you press P, the CD player pauses and the | |
recorder pauses for recording. | |
To restart | |
z You can change CDs during | |
Carry out the following steps instead of Step 7 above. | |
1 | Press pon the remote of the CD player. |
| The recorder pauses for recording. |
2 | Change the CD. |
3 | Press áon the remote of the CD player. |
|
STOP
CD PLAYER P
P = +
z You can also do |
CD player |
Using the procedure for |
1Turn on the CD player and the mixer.
2Carry out Steps 2 to 5 in “Recording on an MD” on page 6 to prepare the recorder for recording.
3Insert a CD into the CD player.
4Select the playback mode (Shuffle Play, Program Play, etc.) on the CD player.
5Press STANDBY.
The CD player pauses for playing and the recorder pauses for recording.
CD player, you can do |
video CD player also. |
To select the video CD player, press button number 2 |
while pressing down the POWER button before starting |
the procedure. |
To select the CD player again, press button number 1 |
while pressing down the POWER button. |
The recorder is factory set to CD player for synchro- |
recording. |
z You can check the remaining recordable time on the |
MD |
Press DISPLAY on the remote controller. |
14